Technology is power
A 3 phase UPS is used for applications with high KW requirements due to their ability to distribute large quantities of power over a larger area and distance.
The most important information about the UPS is displayed on the large 4.3’ touch screen LCD. You can check current state of the UPS or you can make the most advanced settings so all the things go smooth.
The UPS system was created to offer great flexibility for a better cost management. Offers availability for future system adaptation, in case of additional load is required up to 3 UPSes can be installed in parallel and in need of increased back up time multiple battery cabinets can be added.
The Garun Series is a three-phase range (which comprises power units and battery cabinets) designed with advanced features for special industrial applications that fits in the entire electrical architecture of a space or building.
We recommend this UPS for commercial buildings power back-up architecture, management systems, security and fire protection, police or emergency dispatch centers, railway, data and IT application, commercial environments, transportation, medical equipment, industrial robots.
Downtime costs for critical applications, in particular in industrial environments, are very high. These applications must remain in operation as long as possible, therefore both, the UPS and the battery cabinet, can accommodate batteries.
Garun Series ranges from 10kVA to 80kVA.
10KVA / 10KW
Three phase in / three phase out
- Nominal Input Voltage
3 x 400 VAC (3Ph+N)
- Nominal Output Voltage
3 x 360*/380/400/415 VAC (3Ph+N)
- Accepted Input Voltage Range
190-520 VAC (3-phase) @ 50% load
305-478 VAC (3-phase) @ 100% load
46 ~ 54Hz
Terminal Block Wiring
- Transfer Time to Battery / AC
- Typical Backup Time
Depending on the number of batteries
- Communication Port
RS232 / USB / EPO / SNMP / Modbus / AS400 (cards optional)
- Battery Type
Sealed and leak proof maintenance
- Battery Specification
Internal (not included): 20 x 12V 7Ah/9Ah
External (optional): 12V lead acid, (10+10) pcs x 1 string
ViewPower Network Edition and VMWare Shutdown Wizard
On-line with double conversion
Smart battery charger to optimize batteries performance
Adjustable batteries design
Output power factor 1.0
Optional isolation transformer
DSP technology guarantees high performance
Active power factor correction in all phases
High Efficiency on AC mode up to 95.5%
4.3” large touch LCD display
Power management over SNMP / Modbus / AS 400 card
ECO mode operation for energy saving
Dual Input for generator compatibility
- LCD Display
UPS status, Load level, Battery level, Input/Output voltage, Discharge timer, and Fault conditions
AC Mode ≥ 95.5 % with fully charged batteries
Battery Mode ≥ 94.5 % with fully charged batteries
ECO Mode ≥ 98.5 % with fully charged batteries
< 95 % RH at 0-40ºC (non-condensing)
Noise Level: Less that 60dB at 1 m
- Physical Dimensions
Dimensions: 630 x 250 x 750 mm
With external battery pack (please refer to the Support section)